April 27, 2021
Tips for Novice Welders
If you are new to welding, just know that you need to learn how to operate the welding machine the right way or it can cause an injury to you.
A lot of risk are involved in the welding process but if you devote a little bit of effort and employ the right techniques, you can handle any project without suffering from an injury. Given below are few tips you need to know if you are just getting started.
Before getting started, ensure you have bought the required safety kit, such as welding helmet, gloves, glasses, and a good fire resistant jacket. These helment comes in several varieties.
As a matter of choice, you can opt for an auto-darkening one. Again, your work place should have enough ventilation. Otherwise, you can use a strong fume extraction system.
It is not wise to work beside the objects that are inflammable. Choose a workplace whose location is safe.
MIG, TIG And stick flux-cored
Though these terms sounds strange, you don’t have to panic. We will explain them in details in this article.
In wire welding situation, spools of wire are fed via a gun. This method helps you minimize the starts and stops. This way you can easily create proper joints. Furthermore, it is faster and cheap, especially if you want to work on thin sheets of metal.
They are two types of Wire welding: flux-cored and MIG. The MIG type depends upon the shielding gas for protection against contamination. The only disadvantage of this type of welding is that you can’t do it outdoors due to the wind.
Alternatively, flux-cored welding makes use of a special wire that you can work on with or without gas.
For repair work, stick welding is the best choice for newbies. In fact, it is the first process that is highly recommended for beginners. As the name implies, stick welding involves a stick electrode. The use of wire feeder is not necessary.
TIG welding is a good choice for architectural or automative work. Furthermore, it is a better option if you want to work on thin sheets of metal for a seamless look.
Normally, lower input voltages are enough if you want to work on thinner materials, while high voltages are needed to work on thicker materials. If you are a beginner, you may want to operate a machine that allows you to switch between 110v and 220v.
It won’t be easy as a beginner to configure the welding settings. So, we suggest that you go for a welding machine that has an easy to understand interface. Based on the type of project, you can set the right voltage.
Based on the welding process, ensure you choose the right consumables. As you get better at your job, you can easily recognize various types of consumables. This can help you go for the right brand.
So, there you have it . Hope these hints will help you do a better job as a welder.